The simplest vane pump is a circular rotor rotating inside of a larger circular cavity. The centers of these two circles are offset, causing eccentricity. Vanes are allowed to slide into and out of the rotor and seal on all edges, creating vane chambers that do the pumping work.
On the intake side of the pump, the vane chambers are increasing in volume. These increasing volume vane chambers are filled with fluid forced in by the inlet pressure. Often this inlet pressure is nothing more than pressure from the atmosphere. On the discharge side of the pump, the vane chambers are decreasing in volume, forcing fluid out of the pump. The action of the vane drives out the same volume of fluid with each rotation. Multistage rotary vane vacuum pumps can attain pressures as low as 10-3 mbar (0.1 Pa).
Vane pumps are used for liquid transfer applications from chemicals to liquefied gases. Vanes extend from slots in the rotor; sweeping liquid through a cam-shaped cavity. The vanes provide very low slip and high volumetric efficiency.
Vane Pumps In-Stock:Call (844) 800-7867 or firstname.lastname@example.org for price and availability!
|Blackmer||ZCRL2-NH3||New Surplus||2||Threaded||No||ID# 4HA01|
|Blackmer||MLN4||Used||1||Flanged||4.0||4.0||Yes||Cast Iron||ID# 34G-1-2AA11|
|Blackmer||NP2.5E||New Surplus||1||Threaded||2.5||2.5||Yes||Cast Iron||CCW|
|Haight||15R||New Surplus||1||Threaded||1.5||1.5||No||Cast Iron|
|Pulsafeeder||ECO GH6||Used||2||Threaded||0.8||0.8||No||Stainless Steel||PACKAGED WITH 1/2HP EMERSON G638 DC MOTOR @ 1750ROM, CATALOG#: WC0502, FRAME: 56C, SYNCROGEAR GEAR BOX @ 6.200:1 RATIO, TYPE GDP, FRAME 5, MAX 5HP INPUT|